Product ID:EPOXY HARDENER FOR GLOSS MIL-C-22750E 08526CEH, PART 2
MSDS Date:06/16/1994
FSC:8010
NIIN:01-313-8695
Kit Part:Y
MSDS Number: BVVFR

HENTZEN COATINGS, INC

6937 W MILL ROAD
MILWAUKEE, WI 53218
US

Emergency Phone: 414-353-4200/800-424-9300 CHEMTREC

Info Phone: 414-353-4200

Preparer: JANE FREEMAN

Cage: 09225

HENTZEN COATINGS INC

18749 MILWAUKEE, WI 53218 US

Telephone: 414-353-4200

Cage: 09225

METHYL ISOBUTYL KETONE (SOLVENT) (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 14.911%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHYL ETHYL KETONE (2-BUTANONE) (SOLVENT) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 19.459%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

EPOXY RESIN

Fraction By Weight: 50-75%

2.889 LBS/GAL 346.188 GRAMS/LITER

RTECS: 9999999VO

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, SENSITIZATION &
DERMATITIS. EYE: IRRITATION. INHALTION: NAUSEA & RESPIRATORY TRACT
IRRITATION. CHRONIC: REPORTS ASSOCIATE REPEATED & PROLONGED
OVEREXPOSURE WITH PERMANENT BRAIN & NER VOUS SYSTEM DAMAGE, LIVER &
KIDNEY DAMAGE. PROLONGED/REPEATED SKIN CONTACT: DERMATITIS &/OR
ALLERGIC SKIN REACTIONS.
Medical Cond Aggravated by Exposure:ASTHMA AND OTHER RESPIRATORY
AILMENTS; CHEMICAL SENSITIZATION.

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM & QUIET. NOTIFY A PHYSICIAN. EYES: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15 MINUTES. TAKE TO A
PHYSICIAN FOR MEDICAL TREATMENT. SKIN: WASH AFFECTEDAREAS WITH
SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. CONSULT A PHYSICIAN.
INGESTION: CALL A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.

Flash Point Method:TCC
Flash Point:21.0F,-6.1C
Lower Limits:1.2
Upper Limits:10.0
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:FULL PROTECT EQUIP W/SCBA.WATER SPRAY MAY BE
INEFFECTIVE,USE TO COOL (FOG NOZZLES PREFERED) CLOSED CONTAINER TO
PREVENT PRESSURE BLDUP,AUTOIGNITION OR EXPLOSION
Unusual Fire/Explosion Hazard:KEEP CONTAINER CLOSED.KEEP FROM
HEAT/IGNIT SOURCE.CLSD CNTNR MAY EXPLODE W/HEAT.DON'T APPLY TO HOT
SURFACES.NEVER USE WELD/CUT TORCH ON/NEAR DRUM (EVEN EMPTY).

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES AND ELECTRICAL, STATIC OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. CONTAIN AND REMOVE WITH INERT
ABSORBENT AND NONSPARKING TOOLS .

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED TO COMPLY WITH OSHA 1910.106. KEEP
AWAY FROM SPARKS AND OPEN FLAME.
Other Precautions:DON'T INGEST. GROUND CONTAINERS WHEN POURING. AVOID
FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. USE WITH ADEQUATE
VENTILATION & RESPIRATORY EQUIP. AVOID PROLONGED BREATHING OF VAPOR
OR SPRAY MIST. AVOID PROLONGED/REPEATED SKIN CONTACT. *

Respiratory Protection:IN OPEN AREA DURING SAND/GRINDING,USE NIOSH
MECHAN FILTER RESPRTR.IN RESTRICTD VENT,WEAR NIOSH CHEM/MECHAN
FILTER RESPRTR.IN CONFIND AREA,WEAR NIOSH AIR SUPPLD
RESPRTR/HOOD.USE NIOSH RESPRTR WHEN FLAM E CUT,WELD,HAZING MAT'L
COATED W/PRODUCT
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENT TO KEEP AIR
CONTAMINANT CONCENTRATION BELOW PEL & REMOVE DECOMP PRODUCTS
Protective Gloves:REQUIRED FOR PROLONGED/REPEATED CONTACT.
Eye Protection:SAFETY EYEWEAR W/SPLASH GUARD/SIDESHIELD
Other Protective Equipment:USE PROTECTIVE SKIN CREAM WHERE CONTACT IS
LIKELY. PREVENT PROLONGED SKIN CONTACT WITH CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE. WASH
HANDS BEFORE EATING OR SMOKING. SMOKE IN DESIGNATED AREAS ONLY.
Supplemental Safety and Health
* OTHER PRECAUTIONS CONT'D: EMPTIED CONTAINERS MAY RETAIN HAZARDOUS
RESIDUE OR EXPLOSIVE VAPORS. FOLLOW ALL HAZARDS PRECAUTIONS IN THIS
DATA SHEET UNTIL CONTAINER IS THOROUGHLY CLEANED OR DESTROYED.

Boiling Pt:B.P. Text:170 TO 242F
Decomp Temp:Decomp Text:400F,204C
Vapor Pres:74.00 @68F
Vapor Density:> AIR
Spec Gravity:1.00
Viscosity:18" #2 ZAHN C
Evaporation Rate & Reference:FASTER THAN BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:43.11

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING. FUMES MAY CONTAIN CARBON
MONOXIDE AND DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
INCINERATE IN AN APPROVED FACILITY. EPA HAZARDOUS WASTE CODE: D001,
IGNITABLE.

======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.